Q:
What does the application process consist of?
A: If your project is going over
formica, the surface is first cleaned and sanded.
Next, a coat of material is brushed and rolled
onto the surface and Roklook is shaken into the
wet coating. After a short drying time, the excess
Roklook is swept up and a series of multi - layer
clear coats are then applied. The surface dries
for 12 hours and is then ready for use. If your
project is coating ceramic tile, a special tile
preparer is used and then basically the same multi-layered
process, as described above is done. If your project
is plywood or particle board only sanding is required
for preparation. This is only a general application
description, time proven proprietary coatings
and methods are described in detail in the instructional
DVD and manual.
Q
- How long does the process take?
A - An average size formica kitchen
countertop can be completed in one day with no
demolition, no dust, and no harmful fumes. No
job should take more than two days.
Q
- Will my house smell?
A - The Roklook System smells
no worse than ordinary house paint, but anyone
who may be sensitive to those types of odors should
stay away during the installation process
Q
- Can I put hot pans on the surface?
A
- You should not put extremely hot pans on any
surface, including Roklook, but the Roklook
System will withstand temperatures to 210 degrees
fahrenheit, and stain resistance is phenomenal.
Q
- Can ceramic tile be coated with Roklook?
